| Specification | Details |
|---|---|
| Working Pressure |
1.4~7 Kgf/cm² (20~100psi) |
| Input Signal | 4~20 mA DC |
| Standard Stroke | 10~50mm |
| Air Piping Connection | PT (NPT) 1/4 |
| Explosion Proof Classification | Exia II BT6, Exdm II CT6 |
| Degree of Protection | IP 66 |
| Output Characteristics | Linear |
| Material | Aluminium alloy |
| Conduit Connection | 1/2” PF |
| Gauge Connection | PT (NPT) 1/8 |
1 – CE, CIMFR, BIS, ISI, ISO Certified, Approved
2 – It Is Connected With Diaphragm Actuator Directly Without Air Pipe, And Can Be Mounted The Filter Regulator On
3 – Sturdy, Tubeless And Vibration Resistant Design
4 – There Is On Resonance At 5-200Hz
5 – The Change Of RA/DA Acting Is Convenient. It Is Able To Apply To Single Or Double Acting Actuator
6 – It Is Possible To Prevent The Hunting With Orifice To The Small Size Actuator
7 – It Is Economical Due To Less Air Consumption
8 – It Is Able To Control The ½ Split Range With Simple Operation With Replacement Of Parts
1 – CE, CIMFR, BIS, ISI, ISO Certified, Approved
2 – It Is Connected With Diaphragm Actuator Directly Without Air Pipe, And Can Be Mounted The Filter Regulator On
3 – Sturdy, Tubeless And Vibration Resistant Design
4 – There Is On Resonance At 5-200Hz
5 – The Change Of RA/DA Acting Is Convenient. It Is Able To Apply To Single Or Double Acting Actuator
6 – It Is Possible To Prevent The Hunting With Orifice To The Small Size Actuator
7 – It Is Economical Due To Less Air Consumption
8 – It Is Able To Control The ½ Split Range With Simple Operation With Replacement Of Parts
Copyright © 2025 Mark & Aira Valves, All rights reserved. Powered by Mark & Aira Valves.
